31 October, 2021

Top Tips Of Up To The Immediate Present 156-315.80 Exam Guide

Our pass rate is high to 98.9% and the similarity percentage between our 156-315.80 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Check-Point 156-315.80 exam in just one try? I am currently studying for the Check-Point 156-315.80 exam. Latest Check-Point 156-315.80 Test exam practice questions and answers, Try Check-Point 156-315.80 Brain Dumps First.

Page: 1 / 35

Total 428 questions Full Exam Access

Question 1

What are the methods of SandBlast Threat Emulation deployment?

Cloud, Appliance and Private

Cloud, Appliance and Hybrid

Cloud, Smart-1 and Hybrid

Cloud, OpenServer and Vmware

Question 2

Which command will allow you to see the interface status?

cphaprob interface

cphaprob –I interface

cphaprob –a if

cphaprob stat

Question 3

What happen when IPS profile is set in Detect Only Mode for troubleshooting?

It will generate Geo-Protection traffic

Automatically uploads debugging logs to Check Point Support Center

It will not block malicious traffic

Bypass licenses requirement for Geo-Protection control

Question 4

Which of the SecureXL templates are enabled by default on Security Gateway?

Drop

NAT

None

Question 5

Which statement is true about ClusterXL?

Supports Dynamic Routing (Unicast and Multicast)

Supports Dynamic Routing (Unicast Only)

Supports Dynamic Routing (Multicast Only)

Does not support Dynamic Routing

Question 6

Which statement is true regarding redundancy?

System Administrators know when their cluster has failed over and can also see why it failed over by using the cphaprob –f if command.

ClusterXL offers three different Load Sharing solutions: Unicast, Broadcast, and Multicast.

Machines in a ClusterXL High Availability configuration must be synchronized.

Both ClusterXL and VRRP are fully supported by Gaia and available to all Check Point appliances, open servers, and virtualized environments.

Question 7

You have successfully backed up Check Point configurations without the OS information. What command would you use to restore this backup?

restore_backup

import backup

cp_merge

migrate import

Question 8

What is the valid range for Virtual Router Identifier (VRID) value in a Virtual Routing Redundancy Protocol (VRRP) configuration?

1-254

1-255

0-254

0 – 255

Question 9

How many images are included with Check Point TE appliance in Recommended Mode?

2(OS) images

images are chosen by administrator during installation

as many as licensed for

the most new image

Question 10

Which remote Access Solution is clientless?

Checkpoint Mobile

Endpoint Security Suite

SecuRemote

Mobile Access Portal

Question 11

Which of the following commands shows the status of processes?

cpwd_admin -l

cpwd -l

cpwd admin_list

cpwd_admin list

Question 12

How can SmartView application accessed?

http://<Security Management IP Address>/smartview

http://<Security Management IP Address>:4434/smartview/

https://<Security Management IP Address>/smartview/

https://<Security Management host name>:4434/smartview/

Question 13

Joey wants to upgrade from R75.40 to R80 version of Security management. He will use Advanced Upgrade with Database Migration method to achieve this.
What is one of the requirements for his success?

Size of the /var/log folder of the source machine must be at least 25% of the size of the /var/log directory on the target machine

Size of the /var/log folder of the target machine must be at least 25% of the size of the /var/log directory on the source machine

Size of the $FWDIR/log folder of the target machine must be at least 30% of the size of the$FWDIR/log directory on the source machine

Size of the /var/log folder of the target machine must be at least 25GB or more

Question 14

What is true of the API server on R80.10?

By default the API-server is activated and does not have hardware requirements.

By default the API-server is not active and should be activated from the WebUI.

By default the API server is active on management and stand-alone servers with 16GB of RAM (or more).

By default, the API server is active on management servers with 4 GB of RAM (or more) and on stand-alone servers with 8GB of RAM (or more).

Question 15

During the Check Point Stateful Inspection Process, for packets that do not pass Firewall Kernel Inspection and are rejected by the rule definition, packets are:

Dropped without sending a negative acknowledgment

Dropped without logs and without sending a negative acknowledgment

Dropped with negative acknowledgment

Dropped with logs and without sending a negative acknowledgment

Question 16

What API command below creates a new host with the name “New Host” and IP address of “192.168.0.10”?

new host name “New Host” ip-address “192.168.0.10”

set host name “New Host” ip-address “192.168.0.10”

create host name “New Host” ip-address “192.168.0.10”

add host name “New Host” ip-address “192.168.0.10”

Question 17

NAT rules are prioritized in which order?
1. Automatic Static NAT
2. Automatic Hide NAT
3. Manual/Pre-Automatic NAT
4. Post-Automatic/Manual NAT rules

1, 2, 3, 4

1, 4, 2, 3

3, 1, 2, 4

4, 3, 1, 2

Question 18

What is UserCheck?

Messaging tool used to verify a user’s credentials.

Communication tool used to inform a user about a website or application they are trying to access.

Administrator tool used to monitor users on their network.

Communication tool used to notify an administrator when a new user is created.

Page: 1 / 35

Total 428 questions Full Exam Access